Nanjing Tianyi Automobile Electric Manufacturing Co., Ltd.
Nanjing Tianyi Automobile Electric Manufacturing Co., Ltd. Customer First! Quality Focus!
Add to Cart
Auto Parts High / Low Temp Resistant Silicone Rubber Plug connecting Spark Plug
Standard for spark plug wire connector:
Customers:
Connector characteristics
Heat and cold resistance
Great dielectric properties
Acid and alkali resistance
No deformation, no dilatation
Good uniformity of dimension
Can be customized based on customers
Applications:
Specifications and description:
| Raw material properties | Shore-A hardness | 55±5A |
| Elongation at break | ≥300% | |
| Tear strength | ≥15N/mm | |
| Dielectric strength | ≥20KV/mm | |
| Tensile strength | ≥6N/mm2 | |
| Tensile deformation | ≤20% | |
| Density | 1.17±0.02 g/cm3 | |
| Withstand voltage 18KV for 30minutes | NO breakdown | |
| Surface resistance | ≥1011Ω | |
| Ageing resistance | 155±2.5℃X168h,Without any cracking | |
| Connector characteristics | Usage temperature | -20℃-155℃ |
| Breakdown voltage (AC) | ≥30KV | |
| Insertion and removal forces | 20-70N | |
| Overall length | / | |
| Resistance | 1KΩ±20% | |
| Lifetime | ≥50,000km / ≥3years | |
| Heat and cold resistance | ||
| Great dielectric properties | ||
| Acid and alkali resistance | ||
| No deformation, no dilatation | ||
| Good uniformity of dimension | ||
| Can be customized based on customers | ||
| Assembly dimension | Cable entry diameter | 5.5±0.5mm |
| Assembly dimension: connecting cable | | |
| Plug entry diameter | 14±0.5mm | |
| Assembly dimension: connecting spark plug | | |
Established in 1999, Nanjing Tianyi (TY) is a specialized manufacturer of automobile parts such as ignition coils, ignition cable sets, insulating sleeve and resistor for spark plug. Located in Dongping Industrial Park of Lishui County in Nanjing, just 10, 0.5 and 1 kilometers away from Nanjing Lukou International Airport, Jiangsu Yanjiang Highway and Ninghang Highway individually,TY enjoy convenient access to major transportation networks.
The company occupies about 17,350 square meters area and owns many advanced facilities. In the factory, workshops for rubber boot and subassembly, resistor, ignition coil, non-framed coil and molding are all established.
The rubber boot and subassembly workshop adopts rubber injection molding machine. The daily production capability has been over 100 thousand. These products are mainly applied in varieties of automobile and motorcycle engines.
With plastic injection molding machine in the resistor workshop, the daily capacity can reach over 80 thousand. These resistors are mainly used in auto engines and boiler ignition system.